User's Manual

Minix780G Series User's Manual
- 29 -
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security JUSTw00T! Power Exit
OverClock Settisng Configure CPU
frequency and
voltage.
ĕ 
Select Screen

ĖĘ 
Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit
Ź
AMD Overclocking Configuration
Ź
DRAM Timing Configuration
Memory CLK
CAS Latency (Tcl)
RAS/CAS Delay(Trcd)
Row Precharge Time(Trp)
Min Active RAS(Tras)
RAS/RAS Delay(Trrd)
Row Cycle (Trc)
:333MHz
:5.0
:5 CLK
:5 CLK
:15 CLK
:3 CLK
:21 CLK
Dimm Voltage Control
Dram Voltage
CPU Voltage Control
Vcore
NB Voltage Control
NB Voltage
SB Voltage Control
SB Voltage
HT Voltage Control
BIOS Write Protect
Memory 2T Mode
Sideport Memory Select
BIOS Number Select
CPUVID Mode Select
[Auto]
:1.856 V
[Auto]
:1.296 V
[Auto]
:1.176 V
[Auto]
:1.224 V
[Auto]
[Enabled]
[2T Mode]
[128M]
[Single BIOS]
[SVID]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
4.5.7 JUSTw00T! Setting
Ź

$0'2YHUFORFNLQJ&RQ¿JXUDWLRQ
This item allows you to set processor frequency, processor voltage, CPU-NB HT link speed, ncHT
LQFRPLQJOLQNZLGWKQF+7RXWJRLQJOLQNZLGWKPHPRU\FRQ¿JXUDWLRQDQG&38+7UHIHUHQFH
clock.
The option of CPU/HT Reference Clock allows you overclock CPU clock, the Min is 200MHz, the
Max is 400, keyin "+"/"-" to select clock.