User's Manual
Minix780G Series User's Manual
- 15 -
9-FUSB1/FUSB2(Additional USB Port Headers)
Pin No. 'H¿QLWLRQ Pin No. 'H¿QLWLRQ
1 VCC 2 VCC
3 Data 0- 4 Data 1-
5 Data 0+ 6 Data 1+
7 Ground 8 Ground
10 NC
1
2
9
10
10/11-SPEAKER1/FPANEL(Speaker Headers & Front Panel Switches)
SPEAKER1:
Pin No. 'H¿QLWLRQ
1 SPK +
2NC
3NC
4 SPK -
HDD_LED (Hard Driver LED Header)
Connect the HDD LED cable to these PINs, in order to see the HDD status
RESET (Reset Control)
This connector connects to the case-mounted reset switch for rebooting
your computer without having to turn off your power switch. This is a
preferred method of rebooting in order to prolong the lift of the system’s power supply.
PWR-ON (Power Button)
This connector connects to the case-mounted power switch to power ON/OFF the system.
SPEAKER (Speaker)
This 4-pin connector connects to the case-mounted
VSHDNHU<RXVKRXOGIROORZWKHLQVWUXFWLRQRIWKH
speaker cable.
12-IR1(IR Connection Header)
Connect the IrDA cable (if available) to this IR connector.
Pin No. 'H¿QLWLRQ
1 VCC
2 NC
3 IRRX
4 GND
5 IRTX