Minix780G Series Socket AM2/AM2+ Processor Mainboard User's Manual Website: http://www.jwele.com Rev: 1.
Disclaimer The intellectual property of this manual belongs to our company. The ownership of all of the products, including accessories and software etc. belong to our company. No one is permitted to copy, change, or translate without our written permission. We compiled this manual based on our careful attitude, but we can not guarantee the accuracy of the contents.
Table of Contents Chapter 1 Introduction ............................................................................................ 4 1.1 Package Checklist ................................................................................................................4 6SHFL¿FDWLRQV ......................................................................................................................5 1.3 Mainboard Layout .................................................................................
Minix780G Series User's Manual Chapter 1 Introduction 1.1 Package Checklist Thank you for choosing our product. Please check the following packing and accessories, if there is any broken or part missing, please contact with your franchiser. • • • • • • HDD Cable X 1 Rear I/O Panel X 1 User's Manual X 1 Driver/Utility CD X 1 Serial ATA Signal Cable X 1 Serial ATA Power Cable X 1 (Optional) The items listed above are for reference only, and are subject to change without notice.
Minix780G Series User's Manual 6SHFL¿FDWLRQV - Supports AMD® Socket AM2+ / AM2 processors: - AMD Phenom™ / Athlon™ 64 FX / Athlon™ 64 X2 Dual Core / Athlon™ 64 / Sempron™ CPU - Hyper Transport Bus 5200/2000 MT/s (HT 3.0/1.0) - Note: The board can not support 125W TDP processors. For details , please refer to the CPU support list on our homepage. - AMD® 780G + SB700 Main Chipset - Built in Radeon™ HD 3200 Graphics, DirectX® 10 Ready - Supports 2 x 1.
Minix780G Series User's Manual 1.
Minix780G Series User's Manual 1.4 Connecting Rear Panel I/O Devices The rear I/O part of these mainboard provides the following I/O ports: (This picture is only for reference) • PS/2 Keyboard: Connect to PS/2 keyboard. • HDMI:Connects to multimedia devices of HDMI protocol. • SPDIF IN:This connector provides an S/PDIF-IN connection. • SPDIF OUT:Connects to digital audio device. • DVI: Connects to monitor input. • VGA: Connects to monitor input. • eSATA: Connect to peripherial SATA devices.
Minix780G Series User's Manual Chapter 2 Hardware Setup 2.1 Choosing a Computer Chassis • Choose a chassis big enough to install this mainboard. • As some features for this mainboard are implemented by cabling connectors on the mainboard to indicators and switches or buttons on the chassis, make sure your chassis supports all the features required. ,I WKHUH LV SRVVLELOLW\ RI DGRSWLQJ VRPH PRUH KDUG GULYHV PDNH VXUH \RXU FKDVVLV KDV VXI¿FLHQW power and space for them.
Minix780G Series User's Manual 2.3 Installation of the CPU and CPU Cooler Before installing the CPU, please comply with the following conditions: 1. Please make sure that the mainboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU. 3. Please add an even layer of heat sink paste between the CPU and CPU cooler. 4.
Minix780G Series User's Manual 2.3.2 Installation of the CPU Cooler For proper installation, please kindly refer to the instruction manuals of your CPU Cooler. We suggest there should be active cooling to the chipset area in order to let the motherboard IXQFWLRQ SURSHUO\ FRPSOHWHO\ HQFORVHG V\VWHP HQYLURQPHQW ZLWKRXW DGHTXDWH DLU ÀRZ ZLOO UHVXOW in chipset overheat, which is not recommended. 2.
Minix780G Series User's Manual 2.5 Connecting Peripheral Devices 2.5.1 IDE Disk Drive Connectors Each of the IDE port connects up to two IDE drives at Ultra ATA 133/100/66/33 mode by one 40-pin, 80-conductor,and 3-connector Ultra ATA/66 ribbon cables. Connect the single end (blue connector) at the longer length of ribbon cable to the IDE port of this board, the other two ends (gray and black connector) at the shorter length of the ribbon cable to the connectors of your hard drives.
Minix780G Series User's Manual Chapter 3 Jumpers & Headers Setup Quick Components Guide 2 13 14 15 4 5 3 6 7 12 16 1 11 8 9 NO. 1 2 3 4 5 6 7 8 Layout JBAT JDVI_HDMI J5VDUAL CFAN SFAN1 SFAN2 CD_IN F_AUDIO 10 Page NO. No. 13 13 14 14 14 14 14 14 9 10 11 12 13 14 15 16 - 12 - Layout FUSB1/FUSB2 SPEAKER1 FPANEL IR1 JCOM1 J1 PWR12V ATXPWR Page NO.
Minix780G Series User's Manual Checking Jumper Settings • For a 2-pin jumper, plug the jumper cap on both pins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at OPEN position. • For 3-pin jumper, pin 1~2 or pin 2~3 can be shorted by plugging the jumper cap in. How to identify the PIN1 jumpers? Please check the mainboard carefully, the PIN1 is marked by "1" or white thick line.
Minix780G Series User's Manual 3-J5VDUAL(5VDUAL Setting Header) 2-3 pin can not support the 1-2˄Default˅ Enable keyboard post function,need to 2-3 Disable set 1~2 pin enable the function. 4/5/6-CFAN/SFAN1/SFAN2(Fan Power Connectors) CFAN˖ Pin No. SFAN1/SFAN2˖ 'H¿QLWLRQ Pin No. 'H¿QLWLRQ 1 GND 1 GND 2 +12V 2 +12V 3 RPM 3 RPM 4 Control 7-CD_IN(Internal Audio Connectors) Pin No. 1 2 3 4 'H¿QLWLRQ CD-L GND GND CD-R 8-F_AUDIO(Front Panel Audio Connection Header) Pin No.
Minix780G Series User's Manual 9-FUSB1/FUSB2(Additional USB Port Headers) Pin No. 'H¿QLWLRQ Pin No.
Minix780G Series User's Manual 13-JCOM1(Serial Port Header) This JCOM1 header supports a serial port module. Pin No. 'H¿QLWLRQ Pin No. 'H¿QLWLRQ 1 3 DCD TXD 2 4 RXD DTR 5 GND 6 DSR 7 9 CTS RI 8 RTS 14-J1(Multifunctional device connecter) (Optional) The connecter may connect external multifunctional device, ,about detail connect way and de¿nition,please refer to external connect device's manual.
Minix780G Series User's Manual Chapter 4 BIOS Setup Utility BIOS stands for Basic Input and Output System. It was once called ROM BIOS when it was stored in a Read-Only Memory (ROM) chip. Now manufacturers would like to store BIOS in EEPROM which means Electrically Erasable Programmable Memory. BIOS used in this series of mainboard is stored LQ ((3520 DQG LV WKH ¿UVW SURJUDP WR UXQ ZKHQ \RX WXUQ RQ \RXU FRPSXWHU BIOS performs the following functions: 1.
Minix780G Series User's Manual before the operating system is started. Each of POST routines is assigned a POST code, a unique number which is sent to I/O port 080h before the routine is executed. 4.5 BIOS Setup — CMOS Setup Utility • In order to increase system stability and performance, our engineering staff is constantly improving the BIOS menu. The BIOS setup screens and descriptions illustrated in this manual are for your reference only, and may not completely match with what you see on your screen.
Minix780G Series User's Manual This is the System Overview, The System Time, System Date, Primary IDE information, SATA port information. Ź System Information Please Enter this submenu, this will be display BIOS verison, build date, ID number, also will display CPU type, Speed, count, and Memory Size and so on. BIOS SETUP UTILITY Main System Overview AMIBIOS Version :08.00.
Minix780G Series User's Manual 4.5.2 Control Keys Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. Please check the following table for the function description of each control key.
Minix780G Series User's Manual 4.5.3 Advanced Setting Main Advanced PCIPnP BIOS SETUP UTILITY Boot Security Advanced Settings Power Exit Configure CPU. WARNING: Setting wrong values in below sections may cause system to malfunction. Ź Ź Ź Ź JUSTw00T! CPU Configuration NorthBridge Configuration SouthBridge Configuration Onboard Device Configuration Select Screen ĕ Ę Select Item ĖEnter to Sub Screen F1 Go Help F10 General and Exit ESC Save Exit v02.
Minix780G Series User's Manual Ź &38 &RQ¿JXUDWLRQ &OLFN (QWHU! NH\ WR HQWHU LWV VXEPHQX LW ZLOO EH GLVSOD\ FRQ¿JXUHWHG &38 LQIRUPDWLRQ LQFOXGLQJ Module Version, Manufacturer , CPU type, Frequency, FSB Speed, Cache L1 , Cache L2 and so on. • Cool N Quiet Enabled :Lets the AMD Cool N Quiet driver dynamically adjust the CPU clock and VIA to reduce heat output from your computer and its power consumption. Disabled: Disables this function(Default). Ź 1RUWK %ULGJH &RQ¿JXUDWLRQ &OLFN (QWHU! NH\ WR
Minix780G Series Ź 86% &RQ¿JXUDWLRQ Click key to enter its submenu. BIOS SETUP UTILITY Advanced USB Configuration Module Version -2.24.3-13.4 USB Devices Enabled : None Legacy USB Support USB 2.0 Controller Mode BIOS EHCI Hand-Off USB1 1.1 Controller USB1 2.0 Controller USB2 1.1 Controller USB2 2.0 Controller User's Manual Enables support for legacy USB. AUTO option disables legacy support if no USB devices are connected.
Minix780G Series User's Manual ,'( 'LVDEOHV 5$,' IRU WKH 6$7$ FRQWUROOHU DQG FRQ¿JXUHV WKH 6$7$ FRQWUROOHU WR 3$7$ PRGH $+&, &RQ¿JXUHV WKH 6$7$ FRQWUROOHU WR $+&, PRGH $GYDQFHG +RVW &RQWUROOHU ,QWHUIDFH $+&, LV DQ LQWHUIDFH VSHFL¿FDWLRQ WKDW DOORZV WKH VWRUDJH GULYHU WR HQDEOH DGYDQFHG 6HULDO $7$ features such as Native Command Queuing and hot plug. RAID/IDE: Enables RAID for the SATA controller. (The IDE controller still operates in PATA mode.
Minix780G Series User's Manual 4.5.4 PCIPnP Setting Main Advanced PCIPnP BIOS SETUP UTILITY Boot Security Advanced PCI/PnP Settings JUSTw00T! Power Exit Clear NVRAM during System Boot. WARNING: Setting wrong values in below sections may cause system to malfunction.
Minix780G Series User's Manual 4.5.5 Boot Setting Main Advanced PCIPnP BIOS SETUP UTILITY Boot Security Boot Settings Power Exit Configure Settings during System Boot. Ź Boot Settings Configuration Ź Ź Ź Ź JUSTw00T! Select Screen ĕ Ę Select Item ĖEnter to Sub Screen F1 Go Help F10 General Save ESC Exit and Exit Boot Device Priority Hard Disk Drives Removable Drives CD/DVD Drives v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Minix780G Series User's Manual • Wait For 'F1' If Error When set to Enabled,the system waits for the F1 key t be pressed when error occurs. • Hit 'Del' Message Display When set to Enabled,the system displays the message "Press DEL to run Setup" durning POST. • Interrupt 19 Capture When set to Enabled, this function allows the option ROMs to trap Interrupt 19. • Back to Boot Setup Menu Ź Boot Device Priority &OLFN (QWHU! NH\ WR HQWHU VXEPHQX LW ZLOO EH GLVSOD\ VSHFL¿HV WKH ERRW VHTXHQFH IURP WKH av
Minix780G Series User's Manual 4.5.6 Security Setting Main Advanced PCIPnP BIOS SETUP UTILITY Boot Security Security Settings JUSTw00T! Power Exit Install or Change the password.
Minix780G Series User's Manual 4.5.7 JUSTw00T! Setting Main Advanced PCIPnP BIOS SETUP UTILITY Boot Security OverClock Settisng Power Exit Configure CPU frequency and voltage. Ź AMD Overclocking Configuration Ź DRAM Timing Configuration Memory CLK CAS Latency (Tcl) RAS/CAS Delay(Trcd) Row Precharge Time(Trp) Min Active RAS(Tras) RAS/RAS Delay(Trrd) Row Cycle (Trc) JUSTw00T! :333MHz :5.
Minix780G Series User's Manual BIOS SETUP UTILITY JUSTw00T! AMD Overclocking Configuration Options Processor Frequency (FID) Processor Voltage (VID) [Auto] [Auto] CPU-NB HT Link Speed ncHT Incoming Link Width ncHT Outgoing Link Width [Auto] [Auto] [Auto] Ź Memory Configuration CPU/HT Reference Clock (MHz) PCIE Reference Clock (MHz) [200] A.I. Overclock Function A.I. Overclock [Disabled] Auto x4 800 MHz x4.5 900 MHz x5 1000MHz x5.5 1100 MHz Reserved x6.5 1300 MHz Reserved x7.
Minix780G Series User's Manual • Bank Interleaving Sets the bank interleaving feature. • Enable Clock to All DIMMs This item is to enable or disable the unused clocks to DIMMs even the memory slots are not populated. • MemClk Tristate C3/ATLVID Enables or disables the MemClk Tri-Stating during C3 and Alt VID. • Memory Hole Remapping Enables or disables the memory remapping around the memory hole. • DCT Unganged Mode This item allows the selection of the unganged DRAM mode (64-bit width).
Minix780G Series User's Manual • Back to JUSTw00T! Setup Menu • Dimm Voltage Control This item allows you to adjust the DRAM Voltage. • Dram Voltage 7KLV ¿HOG GLVSOD\V WKH FXUUHQW YROWDJH RI '5$0 • CPU Voltage Control This item allows you to adjust the CPU Voltage. • Vcore 7KLV ¿HOG GLVSOD\V WKH FXUUHQW YROWDJH RI &38 • NB Voltage Control This item allows you to adjust the NB Voltage. • NB Voltage 7KLV ¿HOG GLVSOD\V WKH FXUUHQW YROWDJH RI 1% • SB Voltage Control This item allows you to a
Minix780G Series User's Manual 4.5.8 Power Setting Main Advanced PCIPnP BIOS SETUP UTILITY Boot Security JUSTw00T! Power Settisng Power Exit Configure/monitor the Hardware Health Ź Hardware Configuration Ź ACPI Configuration Ź APM Configuration Select Screen ĕ Ę Select Item ĖEnter to Sub Screen F1 Go Help F10 General Save ESC Exit and Exit v02.61 (C)Copyright 1985-2006, American Megatrends, Inc. Ź +DUGZDUH +HDOWK &RQ¿JXUH &OLFN (QWHU! NH\ WR HQWHU LWV VXEPHQX LW ZLO
Minix780G Series User's Manual Ź $&3, &RQ¿JXUDWLRQ 7KHVH RSWLRQV DOORZ \RX WR PDQDJH *HQHUDO $GYDQFHG &KLSVHW $&3, &RQ¿JXUDWLRQ IRU WKH *HUQHUDO $&3, $GYDQFHG &RQ¿JXUDWLRQ 6XVSHQG PRGH WKHUH DUH WKUHH PRGH IRU VHOHFWLRQ S1(POS), S3(STR),and AUTO, the function explains to following: S1(POS): Enables the system to enter the ACPI S1(Power on Suspend)sleep state(default), In S1 sleep state, the system appears suspended any stays in a low power mode The system can be resumed at any time.
Minix780G Series User's Manual • PWRON After PWR-Fail This item selects the system action after an AC power failure. [Off]: When power returns after an AC power failure, the system’s power remains off.
Minix780G Series User's Manual Highlight this item and select ,then press to save the changes that you have made in the Setup Utility and exit the Setup Utility. Or press to return to the main menu. BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security JUSTw00T! Power Exit Exit Options Exit system setup after saving the changes. Save Changes and Exit Discard Changes and Exit es Discard Changes F10 key ccan be used for this operation.
Minix780G Series User's Manual Sleect and press to discard changes and exit, or press to return to the main menu. BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security JUSTw00T! Power Exit Exit Options Save Changes and Exit Discard Changes and Exit Discard Changes Load Optimal Defaults Load Failsafe Defaults Discard changes? [Ok] [Cancel] Discards changes done so far to any of the setup questions. F7 key can be used for this operation.
Minix780G Series User's Manual This option opens a dialog box that lets you install fail-safe defaults for all appropriate items in the Setup Utility: Select and the to install the defaults. Select and then to not install the defaults. The fail-safe defaults place no great demand on the system and are generally stable. If your system is not functioning correctly, try installing the fail-safe GHIDXOWV DV D ¿ UVW VWHS LQ JHWWLQJ \RXU V\VWHP ZRUNLQJ SURSHUO\ DJDLQ ,I \RX RQO
Minix780G Series User's Manual Chapter 5 Driver Installation Check your package and there is Driver CD included. This CD consists of all drivers you need. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which drivers needed so that your system can function properly. Insert CD into your CD-ROM drive and the menu should appear as below.
Minix780G Series User's Manual When you choose Mainboard Driver installation Utility, the drivers menu should appear as below: Back <- ATI Chipset Installation Utility Onboard LAN Driver Audio Driver Exit (This picture is only for reference) From the Drivers MENU you may make 3 selections: 1. ATI Chipset Installtion Utility (Such as ATI Graphic Card) 2. Onboard LAN Driver 3.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
