User Manual

Operating Instructions

HDMI Over IP One source to more display function

1. Connect one HDMI Cable between the HDMI output port of source device and the

HDMI input port of Transmitter unit

2. Connect one HDMI Cable between the HDMI input port of display and the HDMI

output port of Receiver unit.

3. Connect one UTP Cat5e or better cables between the RJ45 port of Transmitter

unit and RJ45 port of Receiver unit.

4. Connect the included 5V DC power supplies to both Transmitter unit and Receiver

unit.

5. Power on the output device first and the source second.

Connecting Diagram

For convenient reference, we’ll call the Main unit Transmitter as TX1, the Main Unit

Receiver as RX1.

1). TX1 is the transmitter with 1x HDMI input port (Connect to HDMI High Definition

source) and 4x RJ45 Link ports, through which it can connect to the receiver RX2

and RX1.

2). RX1 is the receiver with 1x HDMI output and 4x RJ45 Link ports. It can connect to

the RX2 (which can output via HDMI to a monitor) or to other RX2 to form a

multilayered AV distribution network.

3) TX2 is the transmitter with 1x HDMI input port (Connect to HDMI High Definition

Source) and 1xRJ45 output port, through which it can connect to either 1x RX2 or 1x

RX1 (which then connect to other RX1)

4). RX2 is the recei

ver with 1x RJ45 input port and 1x HDMI out port. RX2 can

receive a signal from either 1x TX2 or an RX1 unit.

TX2 RX2

One to many (A)

❉ Transmitter TX2 work with receiver RX1 and RX2.

TX2

RX1

RX2