Installation Manual

Assigning the JTECH-ENCH4 H.264 Encoder a Static IP Address
The first thing you'll want to do is make sure your encoder can live on your network and access the
internet. The best way to ensure that these two things happen is to assign your encoder a new static
IP address.
Before you assign the encoder a static IP address, you will need to know the scheme of your current
network and ensure that the IP address it not being used. Please review sections 1.0 – 2.0 for
assistance in doing so.
Once you know the IP address you want to assign the encoder, navigate to the 'System' Tab >
'Network' menu.
In this menu, you can customize your network settings for the encoder.