User Manual

Panel Descriptions
Front
①Power Status LED Indicator – LED will emit a red light when the splitter is powered on
②HDMI Output Status LED – L1 – L8 Status LEDs will emit a green light when an HDMI
display is connected to corresponding output. (L1 = Output 1, L2 = Output 2, etc.)
③Power On/Off Toggle Switch – Press the toggle switch to the “-“ position to power the
splitter on. Press the toggle switch to the “o” position to power the splitter off.
Rear
①Power Adapter Input Port – Connect the provided 5VDC 2A power supply to the
JTD3DSP0108 splitter
②HDMI Output Ports (1-8) – Connect HDMI displays to HDMI Out ports 1-8
③HDMI Input Port – Connect HDMI source device to HDMI In port
Installation
①
②
③
①
②
③