User Manual
Programmable Control Panel 
10 
4.2.1 Main Menu 
The main menu includes file management, system model, connection type and help. 
1)  File management: Open/Save/Save as a configuration. After program, user can 
save the configuration to a file, so that you can use the same configuration next 
time. 
2)  System model: includes programmable control panels-H, programmable control 
panels-V, WP19R etc., and the buttons interface view are different with different 
models. The pictures below show the differences between programmable control 
panels-V and programmable control panels-H. 
Note: When select the model, it will pop up “Output Port Selection” dialog, user can 
select different RS and IR types, depend on the uses of the two shared ports. The 
dialog is as the picture below: 










