User Manual

Programmable Control Panel

2) There are two send types: send once and send more times. When select “more

times”, the send times and the delay between times can be set. See in picture

below:

3) The send port must be selected as the same as model setting, otherwise the

event cannot be added.

4) The IR can set the carrier on/off, to turn on/turn off the IR sending.

➢ I/O Setting

There is no I/O port in the programmable control panel, so the setting is not

introduced in this manual.

➢ Relay Setting

This item is for the replay ports setting. The setting is as the picture below: