User Manual
Programmable Control Panel
10
4.2.1 Main Menu
The main menu includes file management, system model, connection type and help.
1) File management: Open/Save/Save as a configuration. After program, user can
save the configuration to a file, so that you can use the same configuration next
time.
2) System model: includes programmable control panels-H, programmable control
panels-V, WP19R etc., and the buttons interface view are different with different
models. The pictures below show the differences between programmable control
panels-V and programmable control panels-H.
Note: When select the model, it will pop up “Output Port Selection” dialog, user can
select different RS and IR types, depend on the uses of the two shared ports. The
dialog is as the picture below: