Manualshelf

User Manual

ManualsBrandsJ-Tech Digital ManualsComputer Accessories & Peripherals8-Button Control Panel Wall Plate with Programmable LED Buttons, RS-232, RS-458, Relay and IR Control
11121314151617181920
Programmable Control Panel
9
4. System Operations
4.1 USB Driver Installation
There are USB driver file and JTD-Control software in the disk. The JTD-Control can
run directly without installation.
But when connect the programmable control panel with PC by USB, it may need to
install the USB driver. Use the driver file to install the driver of USB, we can use USB
to program the programmable control panel.
4.2 Software Programming
You can use this software JTD-Control to easily set every button of the programmable
control panel.
After connect the programmable control panel with PC by USB or RS232, we can
open the JTD-Control to program the buttons for controlling.
The main window of JTD-Control has five parts: main menu, panel (button) setting,
event setting, action list and event list. In this manual we will take programmable
control panels-V for example, to show the uses of all functions.
The main window of JTD-Control is as below:
We will introduce all the configurations one by one.