Application Guide

The main executive file named as JTD-Control-VXXX.exe
2.2 Download the JTD-P8 driver files for the product you want to control.
Normally the compressed file will include:
JTD-XXX.rss: This is the rs232 command library. Including all the rs232 commands you can to
assign to the buttons on JTD-P8. You can use this library to design your own button layout
JTD-XXX.wpp: This is the pre-configured mapping for the rs232 command and the buttons on
the JTD-P8. You only need to load this file to JTD-P8, then you are ready to control the device.
Unzip the driver file and copy all files into the ‘Library’ folder under the JTD-Control
application.
Make sure your Library folder has the XXX.wpp file. For this quick start guide, we used our 2X2
video wall controller (JTD-795) as an example.
3. Process