User Manual

Operating Instruction

8. Panel control

8.1 Video switch oper a tion

Signal switching includes 4 switching channels, which can be randomly configured as input/output

according to requirements to form a matrix of 1×4~4×1. It can switch any input signal to 1 ch annel of

output or all channels of output.

Operation format: "output channel" + "input channel"

Such as:

1. Switch output 1 to input 2 source

Operation: press "1" in Output area + "2"in IN area to complete the switch

2. Output 1,2,4 switch to input 3 source

Operation: press "1", "3" and "4" in Output area + "2" in IN source area to complete the switch

3. Switch all output port to input 4 source

Operation:

press any number in Output area + "4" in IN area to complete the switch

4. Go directly into the video wall mode of input 2 signal source

Operation:

press the number "2" in the Input a rea to complete the switch

8.2 Video control

There are five submenus in the Video interface: