User Manual

40
Operating Instruction
13.The firmware update
13.1.MCU application layer upgrade
Open the software UART_ISP.exe at the PC, select the correct port, the baud rate 115200,
input the "A1" in port, and select the path (.bin format) of the program, and click
“update” to complete the upgrade.
13.2 CPLD
Open the software UART_ISP.exe at the PC, se lect the correct port, the baud rate 115200, enter the
"C0" in port, and select the path (.vme format) of the program, and click “update” to complete the
upgrade.