User Manual

37
Operating Instruction
10.7 Audio
Audio interface can only control the output Audio and display the current Audio status in
real time.
Mute; Speaker; Delay second setting
Audio operation: output1/2/3/4 corresponds to each Output,Output All corresponds to All
Output, the operation is consistent;
Audio: click the corresponding output to close the output Audio or start Audio;
Delay: select the output Delay time of audio: range 0-250, with a range of 10 for each
adjustment;
NOTE:
In Audio operation interface, click any button, all buttons are temporarily
unavailable, when the WEB receive s feedback, all buttons can click again. If there is
a special case and no feedback is received, you can manually refresh the page.
10.8 EDID setting
1). Introduction to EDID interface: preset two kinds of default EDID:
ķ
4K30 444 3D LPCM2.0
ĸ
1080P60 444 3D LPCM2.0. the EDID of the four input port can be changed.
2). Blue indicates selection