User Manual

Operating Instruction

8.2.4 EDID Settings

EDID setting interface can set EDID of each input port, and you can choose one mode of built-in

EDID, which has two resolutions: 2160P and 1080P.

Operation:

 In the main menu, select "EDID" to press the "OK".

 Press “ up and down” button to select "Intput1" (The fifth ALL option means that all intputs are

selected)

 Click "OK" to enter the next submenu.

 Press the” up and down” button to select the resolution.

 Click "OK" to confirm

 EDID setup complete

8.2.5 Preset Settings

Preset control interface has three sub menu:

 The call scenario

 Save scene

 Remove scene

three options operation steps are the same, can be stored for a total of eight different scenarios.

If you want to change the scene name needs to go to the web p age, the web page will synchronize the

name, the “Clear” will restore the default scene mode.When you click the “clear”, the name will not

change.The name is restored to the default only when the device recovers the factory settings.

Note: Preset 1-8 is the default P2P mode