User Manual
17
Operating Instruction
When we click "Next", then the signal source of CH1 is the next signal source, and the output
screen is the image of the next signal source.
When we click "Mute", then cl ose the CH1 image,.After we select “Mute” ,the CH1 screen is
black screen.
10). CH0, CH1 mirror Settings
You can set CH0 or CH1 to mirror the X-axis or Y-axis image.
Operation:
In the main menu, select "Video" to press the "OK".
Press “ up and down” button to select "Output1" (The fifth ALL option means that all outputs
are selected)
Click "OK" to enter the next submenu.
Press the” up and down” button to select "CH0".
Click "OK" to enter the next submenu, press the “up and down” b utton to select “Crop”
Set Start x:0, Start y:6000, End x:6000, End y:0
Click the "OK" button to confirm
Horizontal mirror screen setup complete