User Manual

9
Operating Instruction
8.2.1 Video
1). Video switch
Operation:
 In the main menu, select "Video" to press the "OK".
 press “ up and down” button to select "Output1" (The fifth ALL option means that all outputs
are selected)
 click on "OK" to enter the next submenu
 Press the“ up and down” button to select "Swtching" to select the input signal source.The
bottom color of the selected input is white
 click "OK" to enter the next submenu
 Press the ”up and down” button to select the "Input" , and the color at the bottom of the selected
input port becomes white
 click on the "OK" button to complete switching
You can switch any output to any input, or all output t o the same input.
2). Output switch control
You can open/close any of the output port, or open/close all output port.
Operation:
 in the main menu, select "Video" to press the "OK"
 press “ up and down” button to select "Output1" (The fifth ALL option means that all outputs
are selected)
 Click "OK" to enter the next submenu