Users Manual Part 2

J Plus, Inc
6.2.4.2
Upgrade Firmware
From the tree menu, select Upgrade Firmware to move onto the Upgrade Firmware page as shown in Figure 80.
Click Browse and select a Small Cell firmware file which has the .tar file extension. By clicking Apply button, the
software will be downloaded to Small Cell and rebooted after the upgrade as shown in Figure 80 and Figure 81.
Meanwhile, there will be upgrade and reboot notification on the screen as capture in Figure 82. After the reboot,
Web GUI can be accessed again through IP address 10.0.0.1 or the new WAN IP address.
Figure 80: Firmware Upgrade Menu
Figure 81: Screen after Selecting the New Firmware
Figure 82: Notification Screen during Firmware Upgrade Process
www.juniglobal.com J Plus Proprietary and Confidential 82 / 98