Users Manual Part 1

J Plus, Inc
X2AP – Reset
X2AP
X2AP – Setup
X2AP –eNB Configuration Update
MIB
Broadcast Message
SIB1,SIB2,SIB3,SIB4,SIB5,SIB6, SIB7, SIB9, SIB10, SIB11, SIB12
DL / UL HARQ
PHY
2x2 MIMO
RR (Round-Robin)
Scheduler
PF (Proportional Fairness)
Data service
Voice service (VoLTE)
Supporting services
Video service
SMS, MMS
International roaming
PWS
CMAS, ETWS
S1 Handover
Handover
X2 Handover
2G / 3G Interworking
CSFB w / o SI, Blind redirection
Manual Neighbor Management
ANR (Automatic Neighbor Relation) function based on UE’s measurement
Neighbor Management
report
ANR function based on built-in REM function (under development)
Small cell authentication function (USIM-based, Certificate-based)
Security
Tunneling function to Security-GW (Se-GW)
Encryption between UE and small cell, message integrity function
Plug and play, ANR, automatic PCI, EARFCN and TAC allocation (under
SON
development)
Synchronization
IEEE 1588v2 (optional), GPS, Air Sync (In-band)
Table 3: Main Functions
www.juniglobal.com J Plus Proprietary and Confidential 13 / 98