Owner manual
For Your Safe Flight Page 44
Programming Trip Mode
Trip Mode keeps a running total of fuel used (
USD) for all flights. If Trip
Mode = No, fuel ‘
USD’ is zeroed after updating the EDM’s fuel
computer via Refuel modes. NOTE: to clear the fuel used display at any
time, tap
STEP until you see USD. Hold both DIM and ALL/EGT/FF buttons
until the display shows ‘
.0 USD’.
1. Enter the pilot program mode by simultaneously holding the
STEP
and
LF buttons for five seconds.
2. Tap
NEXT repeatedly until you see TRIP Used? No .
3. Tap
YES to select the trip mode or NO to deselect mode.
4. Tap
NEXT to accept your choice.