Installation Manual Instruction Manual

FAA Approved Installation Manual for the Report No 908
EDM-900 and EDM-930 Page 29 of 50 Rev J
Primary Engine Data Management System Date 5-24-2014
Bendix Magnetos Slick Magnetos
Bendix Dual Magneto
JPI PN 420808
non-pressurized
engine
Mount sensor side of bracket towards
magneto body
Bendix -20, -21, -200, 1200 series
non-pressurized
JPI 420815-2
Connector to harness
engine
Connector to harness
Slick 6000, 4000 series
pressurized
JPI 420809
engine
TOP
Sensor ring munted under vent plug.
Stem at right angles to magneto center line
Mount sensor side of bracket towards
magneto body
Alternate bracket location
Vent plug
Spacer ring
Sensor ring bracket
Magneto body
Connector to harness
Slick 6000, 4000 series
non-pressurized
JPI 420815-1
engine
Bendix 1200 series
pressurized
JPI 420807
Connector to harness
engine
Alternate bracket locations
T
O
P
position limit
position limit
Mount sensor side of bracket towards
magneto body, positioned over the magnet
armature
rev Dec 2010
engine
Slick 600 series
JPI PN 420806
non-pressurized
Sensor must be over
moving magnet armature
Remove this screw
to mount sensor
bracket