Installation Manual Instruction Manual

Installation manual for the EDM-760 Twin STC SA00729SE
Report No. 760
Temperature indicating system with Fuel Flow Date 7/20/99 Rev NC
Page 7 of 19
20) Component Parts List for EGT (PN 128) ,TIT (PN 120) Probe in polybag
Thermocouple type K probe
Stainless Steel Clamp Thimble
Stainless Steel Exhaust Seal Washer
Stainless Steel Screw Type Clamp
Ring Terminals
Screws and nuts 6-32 X 1/4
Fiberglass tube 1/2" X 4"
21) Component Parts list for CHT (PN 126) probe
Bayonet Probe Thermocouple type K Spring loaded
Or Gasket thermocouple probe type K
Ring Terminals
Screws and Nuts 6-32 X 1/4"
Fiberglass tube 1/2" X 4"
22) Components Parts list for OIL (PN 124) probe
P/N 400505 -C or -L, OIL probe
Ring Terminals
Screws and Nuts 6-32 X 1/4"
Fiberglass tube 1/2" X 4"
23) Components Parts list for OAT ( PN 122) probe
P/N 400509, OAT probe
Ring Terminals
Screws and Nuts 6-32 X1/4"
Fiberglass tube 1/2" X 4"
24) Components Parts list for IAT/CARB ( PN 130) probe
P/N 400530, IAT probe
Ring Terminals
Screws and Nuts 6-32 X1/4"
Fiberglass tube 1/2" X 4"
25) Component Parts list for Twin Engine, EGT and CHT
P.N. EDM-760 4C -6C
760000 Temperature Indicator 1 1
EGT probe MM-111 8 12
CHT probe P.N. 5050 6 10
126 CHT Gasket probe M-113 2 2
124 Oil probe with option O 2 2
120 TIT probe with option T 2 2
122 OAT probe with option A 1 1
700750 EGT/CHT harness 1 1
700709 Fuel flow harness 1 1
26) Weight and Balance Data
Temperature Indicator EDM-760 1.12 lb.
EGT probe MM-111 2.0 oz. each / 0.125 lb ea.
CHT probe 5050 1.5 oz. each / 0.094 lb. ea.
One Harness 20 ft for 6 cylinder. Each 2.0 lb. ea.
One Harness 20 ft for 4 cylinder. each 1.12 lbs ea.
Fuel Flow Transducer .2 lbs