Installation Manual Instruction Manual

Installation manual for the EDM-760 Twin STC SA00729SE
Report No. 760
Temperature indicating system with Fuel Flow Date 7/20/99 Rev NC
Page 19 of 19
FIG -9
Instructions for Continued Airworthiness (ICA)
There are no field adjustments and or calibration requirements for the EDM-700 series instrument after
initial installation. ICA is not required. Maintenance of nonfunctioning or malfunctioning components is
limited to removal and replacement of JPI factory supplied new or repaired components as described in
the troubleshooting section of the installation instructions