Installation Manual User guide

J.P.Instruments
Fuel Flow Installation Manual
Report # 503
for EGT-701 with Fuel Flow Option Page 1 of 14
Rev B : Date 03/14/97
Table of Contents
1. General 2
2. Initial Check Out 3
3. Installing the Fuel Flow Transducer 4
4. Route the Optional warning control line 5
5. Install the instrument in the panel 5
6. Route the Fuel Flow Transducer Wires 5
7. System Checkout 5
8. Specifications and Limitations 6
9. Pilot Programmable Modes 7
10. Drawing 700923 8
11. Drawing 700922 9
12. Drawing 700921 10
13. Drawing 700124 (
excerpt from report #103, STC 2586NM)
11
14. Drawing 700744 (
excerpt from report 103, STC 2586NM)
12
15. Drawing 700920 Installing the Fuel Flow Differential
Module FFDM-1 or FFDM-2
13,14
J.P.INSTRUMENTS
PO BOX 7033
HUNTINGTON BEACH CA 92704
Last printed 8/7/2008 1:58:00 PM

Summary of content (14 pages)