Instruction Manual

ManualsBrandsJ&M ManualsHardwareRoll Tarp GRAIN CARTS (May 2011 & Older)

PARTS LIST

Grain Cart Roll Tarp Parts List and Set Up Instructions

For Grain Cart Models:

525-14W

620-14

750-14, 750-16, 750-18

875-16, 875-18

1050-18, 1050-22

1075-18, 1075-22

# Part # Description Qty

10 ABCH-1L Adj. Bar for Crank Holder (620, 750, 875) 1

10 ABCH-1EL Adj. Bar for Crank Holder (1075, 1050) 1

11 TSB-1 Tarp Stop Bracket w/Sleeve (525 thru 1075)

Tarp Stop Bracket w/Sleeve (1050)

12 316C-150 3/16" Cable (525) 4

12 316C-164 3/16" Cable (620) 4

12 316C-174 3/16" Cable (750) 4

12 316C-198 3/16" Cable (875) 4

12 316C-1050 3/16" Cable (1050) - 270"L 4

12 316C-240 3/16" Cable (1075) 4

13 381-HB 3/8" x 1" Hex Bolt (525, 620)

3/8" x 1" Hex Bolt (750, 875)

3/8" x 1" Hex Bolt (1075)

3/8" x 1" Hex Bolt (1050)

14 384JB 3/8" J-Bolt 8

15 38-FW 3/8" Flat Washer (all carts except 1050)

3/8" Flat Washer (1050)

16 382-HB 3/8" x 2" Hex Bolt (all carts except 1050)

3/8" x 2" Hex Bolt (1050)

17 HLN-38 3/8" Hex Lock Nut (525, 620)

3/8" Hex Lock Nut (750, 875)

3/8" Hex Lock Nut (1075)

3/8" Hex Lock Nut (1050)

18 1434-HHMB 1/4" x 3/4" Hex Bolt (525, 620)

1/4" x 3/4" Hex Bolt (750, 875)

1/4" x 3/4" Hex Bolt (1075)

1/4" x 3/4" Hex Bolt (1050)

19 HLN-14 1/4" Hex Lock Nut (525, 620)

1/4" Hex Lock Nut (750, 875)

1/4" Hex Lock Nut (1075)

1/4" Hex Lock Nut (1050)

21 14212-HB 1/4" x 2 1/2" Hex Bolt 1

22 316CC 3/16" Cable Clamp 8

24 381-SB 3/8" x 1" Stove Bolt (525, 750, 875)

3/8" x 1" Stove Bolt (620)

3/8" x 1" Stove Bolt (1075, 1050)

25 PT-129 1/2" Plastic Tube x 141" (525) 1

25 PT-150 1/2" Plastic Tube x 160" (620 thru 1075) 1

27 BC-156 3/8" Bungee Cord x 150" (525) 1

27 BC-180 3/8" Bungee Cord x 170" (620 thru 1075) 1

28 TL-144 Tightening Lip x 144" (525) 1

28 TL-158 Tightening Lip x 158" (620) 1

28 TL-168 Tightening Lip x 168" (750) 1

28 TL-192 Tightening Lip x 192" (875) 1

28 TL-264 Tightening Lip x 264" (1050) (2 pcs L/R) 1

30 SPG-1 Square Plastic Grommet 1

31 14STS 1/4" Self Tapping Screw 1

32 BCC-1 Bungee Cord Clip 4

33 12114HB 1/2" x 1 1/4" Hex Bolt 1

34 12LN 1/2" Lock Nut 1

35 516EB 5/16" Eyebolt with Nut 1

# Part # Description Qty

1 525CT Tarp w/ Rivets (525) 1

1 620T Tarp w/ Rivets (620) 1

1 750CT Tarp w/ Rivets (750) 1

1 875T Tarp w/ Rivets (875) 1

1 1050T Tarp w/ Rivets (1050) 1

1 1075T-1822 Tarp w/ Rivets (1075) 1

2 116TB Bows for Tarp (525) 2

2 137TB Bows for Tarp (620)

Bows for Tarp (750, 875)

Bows for Tarp (1050) (1050TB) 5

2 134TB Bows for Tarp (1075) 4

3 150RT 1 1/4" Square Roll Tube (525) 1

3 164RT 1 1/4" Square Roll Tube (620) 1

3 174RT 1 1/4" Square Roll Tube (750) 1

3 198RT 1 1/4" Square Roll Tube (875) 1

3 230RT 1 1/4" Square Roll Tube (1075) 1

3 1050RT 1 1/4" Square Roll Tube (1050) - 270"L 1

4 144TT 1" Square Tiedown Tube (525) 1

4 158TT 1" Square Tiedown Tube (620) 1

4 168TT 1" Square Tiedown Tube (750) 1

4 192TT 1" Square Tiedown Tube (875) 1

4 224TT 1" Square Tiedown Tube (1075) 1

4 1050TT 1" Square Tiedown Tube (1050) - 264"L 1

5 119FP Front End Panel (525) 1

5 14012FP Front End Panel (620, 750, 875, 1050) 1

5 137FP Front End Panel (1075) 1

6 119RP Rear End Panel (525) 1

6 14012RP Rear End Panel (620, 750, 875, 1050) 1

6 137RP Rear End Panel (1075) 1

7 CUJ-1N Crank with Splined U-Joint (525) 1

7 CUJ-1LN Crank with Splined U-Joint (620, 750, 875) L 1

7 CUJ-1EL Crank with Splined U-Joint (1075, 1050) X-L 1

8 ABS-2 Adjustable Bow Supports (525)

Adjustable Bow Supports (750, 875)

8 ABS-2L Adjustable Bow Supports (620) L

Adjustable Bow Supports (1075) L

Adjustable Bow Supports (1050) R

9 CH-1N Crank Holder 1

10 ABCH-1 Adj. Bar for Crank Holder (525) 1

Summary of content (4 pages)

PAGE 1
Grain Cart Roll Tarp Parts List and Set Up Instructions For Grain Cart Models: 525-14W 620-14 750-14, 750-16, 750-18 875-16, 875-18 1050-18, 1050-22 1075-18, 1075-22 # 10 10 11 PARTS LIST # 1 1 1 1 1 1 2 2 Part # 525CT 620T 750CT 875T 1050T 1075T-1822 116TB 137TB 2 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 6 6 6 7 7 7 8 134TB 150RT 164RT 174RT 198RT 230RT 1050RT 144TT 158TT 168TT 192TT 224TT 1050TT 119FP 14012FP 137FP 119RP 14012RP 137RP CUJ-1N CUJ-1LN CUJ-1EL ABS-2 8 ABS-2L 9 CH-1N 10 ABCH-1 Description Tarp
PAGE 2
Roll Tarps for Grain Carts SET-UP INSTRUCTIONS Tightening Lip Installing the Tightening Lip, Bows and End Panels 1 1/4” x 3/4” hex bolt and lock nut Place Tightening Lip on top of low side of grain tank and clamp ends with a vise grips. (NOTE: Grain Cart models 750-18, 1075-18 and 1075-22 have the Tightening Lips built into the grain cart extension. For these model carts, this step can be ignored.
PAGE 3
Roll Tarps for Grain Carts SET-UP INSTRUCTIONS (Continued) Mounting the Center Cable Supports 4 Locate the pre-punched holes in the End Panels and drill 3/8” holes through the grain tank extensions. Attach one 3/8” J-Bolt to the inside of the End Panel using one 3/8” hex lock nuts. Front End Panel Lay the cables over the Tarp Bows. Thread the cable end through the small hole on the edge of the End Panel and attach the cable to the J-Bolt using one 3/16” cable clamp.
PAGE 4
Roll Tarps for Grain Carts SET-UP INSTRUCTIONS (Continued) Attaching the Bungee Cord Attaching the Rivets 6 After the tarp is in place, drill 1/4” holes through the tarp and the outside wall of the Roll Tube at each seam and in the front and rear hems. Keep the holes 1” to 1 1/2” from the end of the tarp to allow space for the Square Plastic Grommet. Drive the 1/4” rivets into the roll tube until it is flush with the cap.