User Manual

17
Power Take-O (PTO) Sha Assembly
1-3/4” & 1-3/8” Weasler Automatic Clutch - Black in Color
# Description Part. No.
1 Back Half PTO JM0018513
2 Front Half PTO JM0018514
3 55ECross Kit JM0018449
4 Auto Clutch JM0018500
5 Yoke, Tube & Sleeve JM0018519
6 Yoke & Sha Assembly JM0018520
7 1-3/4” Spring Lock Yoke JM0018506
8 1-3/4” PTO Complete JM0018443
# Description Part. No.
1 Hub and Spindle Assembly Complete with 3/4”-16 Studs and Nuts (HSA-1075-34) JM0025709
1 Hub and Spindle Assembly Complete with 22MM Studs and Nuts (HSA-1075-22) JM0019927
2 1”-8 Gr5 Z Centerlock Hex Nut JM0002149
3 1”-8 X 8” Gr5 Z Hex Bolt (165450) JM0001487
4 6” Spindle - 29-3/4” Long (628) JM0019102
5 Seal 55179 (Type C) for G250-10,G300-10B, Spring-assisted (CR55179) JM0019179
6 Large Bearing (71455) JM0019112
7 Large Race (71750) JM0019198
8 Hub with studs & nuts (13.19 bolt circle) (11.13 pilot) JM0019300
8 Hub with large and small races 3/4”-16 Studs & Nuts (1050 & 1075 Carts prior to 2006) (H25000-34) JM0019927
9 Stud 22MM 1.5 x 9MM 3.55L 1.005 Knurl (22-MMS) JM0019178
9 3/4”-16 Wheel Stud (for 1050 and 1075 carts prior to 2006)(750-35) JM0025710
10 22 MM Lug Nut (22-MMNW) JM0019192
10 3/4”-16 Wheel Nut (for 1050 and 1075 carts prior to 2006)(913571) JM0018958
11 Small Race (653) JM0019195
12 Small Bearing (663) JM0019177
13 Large Spindle Washer (913632) JM0019106
14 Large Castle Nut (SF-2512) JM0019108
15 3/8” X 3-1/2” Z Roll Pin (3754) JM0020001
16 6” Diameter Spindle Dust Cap (D-25000) JM0019109
17 1/4”-20 x 1” Gr5 Z Hex Bolt (141G5B) JM0002095
HUB & SPINDLE ASSEMBLY 250-10
Grain Carts with 6” Diameter Spindles
# Description Part. No.
1 Back Half PTO JM0024357
2 Front Half PTO JM0024367
3 55ECross Kit JM0024364
4 Auto Clutch JM0024366
5 Yoke, Tube & Sleeve JM0024369
6 Yoke & Sha Assembly JM0024379
7 1-3/8” Spring Lock Yoke JM0024353
8 1-3/8” PTO Complete JM0024333