User guide

Pg. 11
MODEL 1384 RUNNING GEAR REPAIR PARTS LIST
# Part # Description Qty # Part # Description Qty
1 OT-1215NS Adj. Tongue Outer Weldment 1 23 RS-13 Rear Spindle 1
2 IT-1215NS Adj. Tongue Inner Weldment 1 24 MB-346 3/4" x 6” Bolt 2
3 TL-1215NS Tongue Latch Weldment 1 25 LN-34 3/4" Lock Nut 2
4 SS-615NS Small Spring in Latch 1 26 TS-615 Large Tongue Spring 1
5 LS-1215 Latch Pivot Shaft, 1” Diameter 1 27 CP-4 Coupling Pole 1
6 CP-112 Cotter Pin 2 28 ST-1215 Standards (optional) 4
7 TT-13 Telescoping Tongue Complete 1 29 MB-126 1/2" x 5 1/2" Bolt 8
8 TB-1215 Tongue Pivot Bolt 1 30 HN-12 1/2" Lock Nut 8
9 HN-114 Regular Hex Nut 4 31 CL-412 Collar to Coupling Pole 1
10 KP-1215 King Pin Bolt 1 32 H-812-1 Hub Incl. Lug Bolt & Nuts 4
11 HW-1215 Hitch Weldment 1 33
SE-17-25091
Grease Seal 4
12 BB-34 Bronze Bushing, 3/4” 4 34 3780 Inner Bearing (Large) 4
13 SB-34 Special Step Bolt, 3/4" 4 35 2790 Outer Bearing (Small) 4
14L TRE-1L Tie Rod End, Left 2 36 SW-1314-78 Spindle Washer 4
14R TRE-1R Tie Rod End, Right 2 37 SN-1-78 Slotted Spindle Nut 4
15L HN-1L 1”-14 Hex Nut, Left 2 38 CP-316 Cotter Pin 4
15R HN-1R 1”-14 Hex Nut, Right 2 39 DC-17 Dust Cap 4
16 TR-20 Tie Rod, 1” Diameter 2 40 WR-16114 Wheel Rim, 8 Hole, 16.1 x 14 4
17L SA-13L Spindle and U-Assy w/Arm, L/H 1 40 WR-225-825 Wheel Rim, 8 Hole, 22.5 x 8.25 4
17L SA-13L-S* Spindle and U-Assy w/Arm, L/H 1 40 WR-225-135 Wheel Rim, 8 Hole, 22.5 x 13.5 4
17R SA-13R Spindle and U-Assy w/Arm, R/H 1 41 WB-41 Wheel Stud 32
17R SA-13R-S* Spindle and U-Assy w/Arm, R/H 1 42 WB-40 Wheel Nut 32
18 EB-134 End Spindle Bronze Bushing 4 43 1633 Grease Fitting 4
19 SPN-134 Spindle Bolt x 13 1/2" 2 44 SB-212 Spacer Blocks 2
20 HN-134 1 3/4" Hex Nut 2 45 78214-BS 7/8” x 2 1/4” Bolt with Spacer 1
21 FA-1215 Front Axle Weldment 1 46 3720 Inner Cup, Large 4
22 RA-13 Rear Axle Weldment 1 47 2720 Outer Cup, Small 4
22 RA-13-SC* Rear Axle Weldment 1
* For Standard Clearance Running Gears