Owner's manual

15
HUB AND SPINDLE ASSEMBLY
REPAIR PARTS LIST AND DIAGRAMS
When performing maintenance work, wear sturdy, rough-soled work shoes and protective equip-
ment for eyes, hair, hands, hearing and head. Follow Operator’s Manual instructions to ensure
safe and proper maintenance and repair.
Your local, authorized dealer can supply genuine replacement parts. Substitute parts may not
meet original equipment specications and may be dangerous.
BE CERTAIN THAT ALL POWER IS SHUT OFF BEFORE PERFORMING ANY MAINTENANCE
OR REPAIR WORK.
# Part # Description
1 27x32-10HD Wheel Rim, 10 hole 27x32 HD
31x32-10 Wheel Rim, 10 hole 31x32 (3 pc)
OR-3132 Rubber O-Ring Seal
32x36-10 Wheel Rim, 10 hole 32x36
44x32-10 Wheel Rim, 10 hole 44x32
2 H25000 Hub w/Studs and Nuts
3 71455 Large Bearing
4 663 Small Bearing
5 71750 Large Race
6 653 Small Race
7 CR55179 Seal
8 EM-25M Spindle Washer
9 SF-2512 Slotted Spindle Nut
10 3754 Cotter Pin
11 D-25000 Dust Cap w/Gasket
12 22-MMS Wheel Stud, 22 MM x 90 MM
13 22-MMNW Wheel Nut, 22 MM
14 628 Spindle, 6” diameter x 28”
15 HSA-1075 Hub and Spindle Assembly
16 18HBLN 1” x 8” Hex Bolt w/Lock Nut
BOLT ON HITCH ASSEMBLY
# Part # Description
1 SHW-112N-25 Swivel Hitch Weldment clevis type (2 1/2” shaft)
1 SHW-278 Swivel Hitch Weldment clevis type (2 7/8” shaft) scales
2 SHW-112SN-25 Swivel Hitch Weldment spade type (2 1/2” Shaft)
2 SHW-278S Swivel Hitch Weldment spade type (2 7/8” Shaft) scales
2 SHW-112SB Swivel Ball Hitch Weldment spade type (2 1/2” shaft)
2 SHW-278SB Swivel Ball Hitch Weldment spade type (2 7/8” shaft)
3 212PC 2 1/2” x 13 1/4” Shaft w/collar
4 1412BN 1” x 4 1/2” Gr 5 HHMB w/nut
5 HSPS-1 Hitch Spool Plate Support
6 WBW-278 Weigh Bar Weldment
7 343BWN 3/4” x 3” Bolt (Gr 8) with Heavy Lock
Washer and Nut
8 343HB 3/4” x 3” Hex Bolt (Gr 8)
9 1512BN 1” x 5 1/2” Bolt (Gr 5) with nut
10 16BN 1” x 6” Bolt (Gr 5) with nut (scales)
Cart equipped WITH Electronic
Weigh System
Cart equipped WITHOUT
Electronic Weigh System