User Manual
5
4. While the LED indicator now turns back to flash blue in every 3 seconds, Air Tune and mobile
phone are connected well and into standby mode. Now you start using this car kit with your
mobile phone.
5. Turn on your car radio and switch to FM channel, adjust the radio frequency channel to empty or
un-used frequency. Now the radio output as “zzz” sound or no sound.
6. The LCD of Air Tune automatically turns on while Air Tune is being powered on. The LCD will
then display 88.1MHz as the first frequency. In the future, it will display the last used channel.
7. When the radio frequency channel of Air Tune and the radio are same, the “zzz” sound will stop.
8. Plug the audio cable into Air Tune and your mobile phone or audio player, ex. SonyEricsson’s
walkman series(without A2DP), Nokia MP3 mobile(without A2DP), iPod, Zune, sansa, Zen, CD
player,…etc.., then play the music and
the LCD shows symbol on the right side of FM
frequency displayed.. The music will come out from car stereo.
9. Be sure to manage your music’s volume, bass and treble settings using your car stereo’s
controls to get the best sound quality with Air Tune.
10. While calling comes or dials, Air Tune broadcasts your mobile phone sound to the FM radio in
your car. If your mobile phone has A2DP support, after your mobile phone complete the
connection with Air Tune via Bluetooth technology, then the music in your mobile phone can
come out from car boom as well.
11. Press the functional key on the left side of Air Tune once to turn Air Tune off, the tone goes
down is heard. Then LED becomes off, too.
12. Under the following situations, you may need to repeat the above instruction step by step:
a. For the first time connection
b. After you power-off your cell phone
c. After any other cell phone connects with Air Tune.
13. Be sure to enable the Auto-answering mode of your mobile phone before using this product.
Once your mobile phone has been set, auto-answering function shall work after 1~4 rings when
phone calls come in. If you don’t enable the Auto-answering function, the answer key needs to
be pressed to answer your call.