User's Manual

- 12 -
Checkups after installation
External Camera Installation (Option)
1 Select a place to install
Select a place to install the external camera and fix with the screw provided.
(The connecting part should be toward to the ground.)
2 Connect the camera to JS-300G
Connect the camera to JS-300G with the cable provided. (
, A/V)
3 Fix the camera angle
After adjusting camera angle, fix the camera with the lock screws on the bracket.
★ Disconnect the power during installation of the camera.
★ External Camera is only for internal use.
5. Working Test
Play back the saved data after testing drive. Then, check if the
data is recorded correctly and revise the camera place on it.
★ JS-300G is working based on High- Sensitivity Camera Sensor.
The recorded video image can be shown dark if the device is
installed toward the sky.
1. If the camera angle is not proper, adjust with rotating the lock
screw and fix it after. (Refer to the step 2 ~ 5).