User's Manual

4) Priority Scan mode
This feature allows you to monitor two different channels at the
same time. If you pre -set any priority channel other than the
current channel in use, the pre-set channel will be scanned every
0.5 second and signals you when a call is received.
To access the Priority Scan mode,
 When priority scan is highlighted, press the Up/ Confirm/ Down
button (#6) briefly to enter to the Basic mode.
- To change the Priority channel,
 In the Priority Scan channel selection mode, press the Up/
Confirm/ Down button (#6) briefly to choose the desired Priority
Scan channel to use.
The corresponding Priority Scan channel will be displayed in the
LCD panel (#11).
 Press the Up/ Confirm/ Down button (#6) to confirm your selection.
5) VOX selection mode
The Voice Activated Transmission (VOX) function allows your voice
to activate transmission automatically when the Communicator is
used with the optional handsfree MIC/ headset (refer to enclosed
Accessory Order Form).
It also allows handsfree use when a MIC/ headset is not being used
without having to use the PTT Button (#2).
To access the VOX Selection menu,
- When VOX is highlighted, press the Up/ Confirm/ Down button(#6)
briefly to move to the VOX response sensitivity selection mode.
- In the VOX response sensitivity selection mode, press the Up/
Confirm/ Down button (#6) briefly to enter to the Basic mode.
The corresponding VOX response sensitivity will be displayed in
the LCD panel (#11).
- Press the Up/ Confirm/ Down button (#6) to confirm your selection.
6) VOX recovery time selection mode
This allows the response characteristics of the VOX function to
be precisely adjusted to suit individual needs.
To access the VOX Recovery Time Selection menu,
- When VOX Delay is highlighted, press the Page button (#6) until
the Radio set up menu appears on the LCD panel (#11)
- Press the Up/ Confirm/ Down button(#6) to select from 5, 3, 2, or 1
second setting. This setting determines the delay time between
transmitting and receiving.
- Press the Up/ Confirm/ Down button (#6) to confirm your selection.