User's Manual

Pressing the menu button (3) in the Unit Selection menu enters the Alarm
Set menu and you can select Alarm function(OFF, ON, +TX) by using the
up/down button(5, 6).
OFF : Alarm OFF
ON : Alarm ON
+TX : If Alarm is on, The unit transmit unit name and temperature
automatically (emergency selective calling)
3) Alarm Limit Temperature set
Two conditions of Alarm operation
Alarm
AL H: AL L:
alarm
AL L: AL H:
Alarm
Pressing the menu button(3), then “AL H: 0C” is displayed on LCD monitor.
(“C”(Celsius) or “F”(Fahrenheit) is displayed on LCD monitor. It was
selected before) And then you change value by using up(5) or down(6)
button.
Pressing the menu button(3), then “AL L: 0C” is displayed on LCD monitor.
And then you change value by using up(5) or down(6) button.
3.3-6 TIME MODE
This mode is composed of 3 menu. You can use a watch in this mode.
- Time calibration
- Alarm selection
- Alarm time set
1) Time calibration
Pressing the menu button(3) in the Time Standby allows you to enter time
Calibration menu and you can select the time unit in the 12/24 hour by
using up/down button(5, 6).
2) Alarm selection