User's Manual

Pressing the menu key (left/right arrow key) in the Weather Channel Selection menu
allows you to enter Weather Alert Selection menu. You can select ALERT ON/OFF by
using the up/down arrow key. (DEFAULT=OFF)
If the WEA Alert On, this radio always detects the weather Alert On, this radio
always detects the weather alert signal(=1050Hz) of weather channel.
3.3-4 COMPASS MODE
Pressing the Mode/key lock button (4) in the Weather Mode allows you to enter
Compass radio mode and it shows you the current direction on the basis of
which radio antenna is heading for.
These are 8 directions such as N/NE/E/SE/S/SW/W/NW in the compass direction.
Detailed function by menu
1) Calibration menu
Pressing the menu button (2, 3) in the Compass Standby allows you to
enter Compass Calibration menu. You select CALIB ON by using up or down
button(5, 6), and then you turn the unit 2cycles slowly, and at that time
you must maintain the center of LCD monitor.
If that is so calibration is completed
2) Compass Variation menu.
Pressing the menu button (3) in the Compass Calibration menu allows you
to enter Compass Variation menu. You can one out of DECL 90E ~ 90W by
using up/down button(5, 6).
3.3-5 TEMPERATURE MODE
This mode is composed of three menu, and seen the current temperature.
- Celsius or Fahrenheit
- Alarm set
- Alarm Limit temperature set
1) Celsius or Fahrenheit selection
Pressing the menu button (3) in the Temperature standby allows you to
enter the Celsius or Fahrenheit Selection menu, and you can select
Fahrenheit or Celsius by using the up/down arrow button(5, 6).
2) Alarm set