User's Manual

2) FM Fine Tune
Pressing the menu button (3) in the FM seek menu allows you to enter FM
tuning menu.
You can increase and decrease FM broadcast frequency by 100 Hz using the
up/down button(5, 6).
3) FM Preset Memory
Pressing the menu button (3) in the FM Fine menu, “MEM OFF” is displayed on LCD
monitor. And the n Pressing the up/down button(5, 6) allows you to select “MEM ON”,
then press the Menu button(3).
If that is so, “M1 87.5” is displayed and “1” blinks. It means that
broadcast channel of 87.5MHz is memorized in Memory 1.
You can memory 9 broadcast channel. If you want to memory broadcast channel
of 99.5MHz in Memory 5, select 5 by using the up/down button(5, 6). And
then pressing the menu button(3) allows you to do auto selection or
passive selection.
4) FM only or Two way
Pressing the menu button (3) in the FM preset menu allows you to enter FM
selection menu.
You can select one of FM OFF/FM WAY by using the up/down button(5, 6) .
If “OFF” is selected, you cannot receive GMRS but receive FM radio in the
FM mode. And so you cannot receive FM radio but receive GMRS in others mode.
If “WAY” is selected, you can receive FM radio in all modes, except for
unit’s transmission
or reception
3.3-3 WEATHER MODE
Pressing the function key(4) in the FM MODE allows you to enter weather
Radio mode shows weather channel operation status after 1 second.
1) Weather Channel Selection menu
Pressing the menu key (left/right arrow key) in the Weather standby allows you to
enter Weather Channel Selection menu.
Pressing the menu key (left/right arrow key) again will blink the channel
Code icon and then pressing the up/down arrow key allows you to select
the channel 01~10
2) Weather Alert Selection menu