User's Manual

< SETUP MANU >
PWR AUTO - In the use of default When the power on state.
(1~7CH,GMRS:2W /8~14CH,FRS:0.5W /15~22CH,GMRS:2W)
PWR LOW - In the use of Only 0.5W for manual.
(1~22CH,GMRS/FRS:0.5W )
3.2.2 Description of Button function
1. Power Button(1)
- To turn the Unit ON, press and hold the Power Button(1).
- To turn the Unit OFF, press and hold the Power Button(1) for more than 1, 2
second.
2. UP(5) or DOWN(6) Button
- Pressing the UP(5) or DOWN(6) Button in stand by mode, Volume is increased and
decreased.
- Pressing the UP(5) or DOWN(6) Button in Menu mode allow you to change the
setting of menu.
3. Mode(4) Button
- Pressing the Mode(4) Button allow you to change the mode.
- If you press the Mode(4) Button during approximately two second, Lock
function for menu button is operated and Key Lock Indicator is displayed in
LCD monitor.
- To release lock function, press and hold Mode(4) Button for more than 2
second.
4. Menu(2, 3) Button
- Pressing the Menu(2, 3) Button allow you to select next menu in function
edit mode.
But this Button function is different in Stopwatch mode. Its functions are
Start/Stop/Clear.
5. PTT (Push-To -Talk) Button(8)
- Pressing the PTT Button(8), Voice signal is transfer to the other unit,
Red LED above LCD monitor(13) and Transmission icon(T) in LCD monitor(13)
is lighted.
- Removing your finger, the unit stops transmission and return to the
receiving stand by mode.
- You can transmit a call signal and unit name by double I PTT Button(8)
Keying.
Unit name is changed in SETUP Mode.
6. Monitor Button(7)
- Pressing the Monitor Button(7) allow you to hear received signal in the
current channel.
- Pressing the Monitor Button(7) for more than 3 second allow you to hear beep
tone and received signal in the present channel continuously.
And Pressing the Monitor Button(7) releases the auto monitoring.
7. EXTERNAL Mic/Speaker(9)