User's Manual

1) Pressing the mode key in the two-way mode allows you to enter

FM radio mode and enter FM standby mode showing current FM

operating status after 1 second.

2) Detailed function by menu.

(1) FM Seek

- Pressing the menu key in the FM Standby display allows

you to enter FM seek menu and you can scan the FM radio

frequency by using up/down key. If an active broadcast

signal is detected, it receives a signal in that

channel.

(2) FM Tune

- Pressing the menu key in the FM seek menu allows you to

enter FM tuning menu. You can increase and decrease FM

broadcast frequency by 0.1KHz using up/down key.

(3) FM Preset menu

- Pressing the menu key in the FM Tune menu allows you to

enter FM preset menu. You can preset the broadcast

channel up • 9 channels by using the shift key. You can

change a broadcast frequency by using up/down key.

(4) FM selection menu

- Pressing the menu key in the FM Preset allows you to

enter FM selection menu. You can select one out of FM

off/FM only/FM +2WAY

3. WEATHER MODE

WEATHER Mode Weather standby display

1) Pressing the mode key in the FM MODE allows you to enter weather

radio mode shows weather channel operation status after 1

second.

2) Detailed function by menu.

(1) Weather Channel selection menu

- Pressing the menu key in the Weather Standby allows you

to enter weather channel selection menu. You can select

the weather channel out of WEA 1/~/WEA 10. (Default=1)

(2) Weather Alert selection menu

- Pressing the menu key in the Weather Channel Selection

menu allows you to enter the Weather alert selection

menu. You can select ALERT ON/OFF by using up/down key.

(Default=OFF)

- If the WEA Alert On, this radio always detects the

weather alert signal (=1050Hz) of weather channel.

4. COMPASS MODE

COMPASS Mode Compass standby display

After 1 second

Menu key