User's Manual

TWO WAY mode. TWO WAY standby display

1) Pressing the mode key in the set up mode allows you to enter the

two-way mode. Current channel and code are shown on LCD

2) Detailed function in the two-way mode.

(1) Channel/Code selection menu

- Pressing the menu key in the standby display of Two way

mode allows you to enter the channel selection menu

with beeping and the current channel is blinking. You

can select the channel by using up and down key.

- Pressing the shift key allows you to enter the code

selection menu with key beeping and the current code is

blinking. You can select the code by using up and down

key.

- Pressing the shift key allows you to return to the

channel selection menu.

(2) Scan selection menu

- Pressing the menu key in the channel/code selection

menu allows you to enter the scan selection menu with

key beeping. If there is no key entering for 10 seconds

in the scan selection menu, returns to the TWO WAY

standby display.

- You can select scan mode in the off, Normal scan and

priority scan by using up / down key while Scan is

blinking.

- If you select the Normal scan, it starts to scan the

channel from the current channel.

- If you select the priority scan, it scans the current

channel and priority channel in turn.

(3) VOX selection menu

- Pressing the menu key in the scan selection menu allows

you to enter VOX selection menu with key beeping.

- You can select one out of off/Hi/Mid/Low by using up or

down key.

(4) Scrambler selection menu

- Pressing the menu key in the VOX selection menu allows

you to enter scrambler selection menu with key beeping.

- You can select one out of off/1/2/3/4 by using up or

down key.

2. FM RADIO MODE

FM RADIO MODE FM standby display

After 1 second

Menu key