User's Manual

-Using a mobile phone with built-in Bluetooth capability
1. You pair the Headset with your phone by adding it to a list of paired devices in the phone.
They then recognize each other when they connect.
2. To pair the Headset with the phone, refer to manual which provided mobile phone provider.
NOTE: The Headset passkey is 1234
Making call and Receiving Calls.
Once you have paired the Headset with your Bluetooth Audio-gateway, you can make and receiving
calls using the Headset as long as it is turned on and within range of the phone (up to 10m/ 30ft.
with no solid objects in the way)
In connection with making and receiving calls you press the Headset Talk button to
. Make a call
. Answer a call
. End a call
. Transfer the sound from the phone to the Headset.
Making Call
To make a call using the phone keys
1. Make sure the phone and the Headset are on and within range of each other.
2. Enter the number as you normally would.
3. With an Ericsson, Motorola or other phones with built-in Bluetooth capability:
When the call has been set up, transfer the sound to the Headset by pressing the Headset
Talk button.
4. To end the call, press the Headset Talk button.
Answering Calls
To answer a call using the Headset Talk button
1. When the phone rings, press the Headset Talk button once.
you can hear melody(short).
2. End the call by pressing the Headset Talk button, At this time also you can hear different
melody(long) from calling melody.