Instructions / Assembly

6
7) Set the next cabinet tight to the rst
cabinet and use clamps to hold in place
while you level it and make sure that
the front edges are ush. Attach the two
cabinets together using 1 1/8" particle
board screws. Attach the cabinet to the
wall with 2 1/2" screws into the studs.
Continue with the same process for all
upper cabinets.
8) Always start with the corner base cabinet
making sure it is level. Install 2 1/2" screws
through the top fastening strip into the
studs that were previously marked.
10) With the base cabinets in place, insert
the toe-kick clips into the leg. Set the
toe-kick in place and push down on the
clip to secure the toe-kick.
9) When installing the base cabinets, start
by unfolding the legs and adjust them
to 4 1/2" from the cabinet base. Place the
cabinet on its legs and put into place.
Further adjustment may be needed to
make the top of the cabinet level with
your 34 1/2" level line.
1
2
3
Push & click
Push down
on clip