SDS

Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR 1910.1200
Initial preparation date: 06.15.2018 Page 6 of 13
Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B
(where applicable) or to an acceptable level (in countries where exposure limits have not been
established), an approved respirator must be worn.
General hygienic measures:
Avoid contact with skin, eyes and clothing.
Wash hands before breaks and at the end of work.
Wash contaminated clothing before reuse.
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Appearance White liquid
Odor Amine-like
Odor threshold Not determined or not available.
pH Not determined or not available.
Melting point/freezing point Not determined or not available.
Initial boiling point/range Not determined or not available.
Flash point (closed cup) Closed cup: >93.3 °C (>199.9 °F) [Setaflash.] [Product does not
sustain combustion.]
Evaporation rate Not determined or not available.
Flammability (solid, gas) Flammable in the presence of the following materials or conditions:
open flames, sparks and static discharge.
Upper flammability/explosive limit Not determined or not available.
Lower flammability/explosive limit Not determined or not available.
Vapor pressure Not determined or not available.
Vapor density Not determined or not available.
Density Not determined or not available.
Relative density 1.955
Solubilities Not determined or not available.
Partition coefficient (n-octanol/water) Not determined or not available.
Auto/Self-ignition temperature Not determined or not available.
Decomposition temperature >220°C (>392°F)
Dynamic viscosity Not determined or not available.
Kinematic viscosity Not determined or not available.
Explosive properties Not determined or not available.
Oxidizing properties Not determined or not available.
Other information
VOC Content <1%
SECTION 10: Stability and reactivity
Reactivity:
Does not react under normal conditions of use and storage.
Chemical stability:
Stable under normal conditions of use and storage.
Possibility of hazardous reactions:
None under normal conditions of use and storage.
Conditions to avoid: