SDS

Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR 1910.1200
Initial preparation date: 06.15.2018 Page 4 of 13
Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B
Not determined or not applicable.
Notes for the doctor:
Not determined or not applicable.
SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media:
Use appropriate fire suppression agents for adjacent combustible materials or sources of ignition
Unsuitable extinguishing media:
Not determined or not applicable.
Specific hazards during fire-fighting:
Thermal decomposition can lead to release of irritating gases and vapors
Special protective equipment for firefighters:
Use typical firefighting equipment, self-contained breathing apparatus, special tightly sealed suit
Special precautions:
Not determined or not applicable.
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Ensure adequate ventilation
Ensure air handling systems are operational
Wear protective eye wear, gloves and clothing
Environmental precautions:
Should not be released into the environment
Prevent from reaching drains, sewer or waterway
Methods and material for containment and cleaning up:
Wear protective eye wear, gloves and clothing
Absorb with non-combustible liquid-binding material (sand, diatomaceus earth (clay), acid binders, universal
binders)
Dispose of contents / container in accordance with local regulations
Reference to other sections:
Not determined or not applicable.
SECTION 7: Handling and storage
Precautions for safe handling:
Use only with adequate ventilation.
Avoid breathing mist or vapor.
Do not eat, drink, smoke or use personal products when handling chemical substances.
Conditions for safe storage, including any incompatibilities:
Keep container tightly sealed.
Protect from freezing and physical damage.
Store in a cool, well-ventilated area.
SECTION 8: Exposure controls/personal protection
Only those substances with limit values have been included below.
Occupational Exposure limit values: