SDS

Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR 1910.1200
Initial preparation date: 06.15.2018 Page 2 of 11
Steel Reinforced Epoxy Hardener - Fast Cure - Twin Tube - Part B
SECTION 3: Composition/information on ingredients
Identification Name Weight %
CAS number:
72244-98-5
Curing Agent <40
CAS number:
7727-43-7
Barium Sulphate <30
CAS number:
1317-65-3
Calcium Carbonate <30
CAS number:
14807-96-6
Talc Powder <10
CAS number:
90-72-2
Amine Mix <5
CAS number:
65997-17-3
Fiberglass Powder <5
CAS number:
13463-67-7
Titanium Dioxide <1
Additional Information:
The specific chemical identity and/or exact percentage (concentration) of composition has been withheld as
a trade secret in accordance with paragraph (i) of the OSHA Hazard Communication Standard (29 CFR
§1910.1200).
Fiberglass powder (CAS # 65997-17-3) is classified as a carcinogen in its inhalable form. Since the fiberglass
powder in this product is not inhalable, the product itself is not classified as a carcinogen in the form
presented.
Although this product contains Titanium Dioxide, the Titanium Dioxide is bound and the particles are not of
respirable size.
SECTION 4: First aid measures
Description of first aid measures
General notes:
Not determined or not applicable.
After inhalation:
Loosen clothing as necessary and position individual in a comfortable position
Maintain an unobstructed airway
Get medical advice/attention if you feel unwell
After skin contact:
Rinse affected area with soap and water
If symptoms develop or persist, seek medical attention
After eye contact:
Rinse/flush exposed eye(s) gently using water for 15-20 minutes
If symptoms develop or persist, seek medical attention
After swallowing:
Rinse mouth thoroughly
Seek medical attention if irritation, discomfort, or vomiting persists
Most important symptoms and effects, both acute and delayed
Acute symptoms and effects:
Not determined or not applicable.