SDS
Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B
Section 11. Toxicological information
Numerical measures of toxicity
Acute toxicity estimates
Product/ingredient name
2,4,6-tris(dimethylaminomethyl)phenol
1200
1280
N/A
N/A
N/A
Oral (mg/
kg)
Dermal
(mg/kg)
Inhalation
(gases)
(ppm)
Inhalation
(vapors)
(mg/l)
Inhalation
(dusts
and mists)
(mg/l)
Section 12. Ecological information
LogP
ow
BCF
Potential
Bioaccumulative potential
Other adverse effects
:
No known significant effects or critical hazards.
Product/ingredient name
2,4,6-tris
(dimethylaminomethyl)phenol
0.219
-
Low
Toxicity
titanium dioxide
Acute LC50 5.5 mg/l
Crustaceans
48 hours
Product/ingredient name
Species
Result
Exposure
Persistence and degradability
Soil/water partition
coefficient (K
OC
)
:
Not available.
Mobility in soil
Not available.
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation and
any regional local authority requirements. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Waste should not be disposed of
untreated to the sewer unless fully compliant with the requirements of all authorities
with jurisdiction. Waste packaging should be recycled. Incineration or landfill
should only be considered when recycling is not feasible. This material and its
container must be disposed of in a safe way. Care should be taken when handling
emptied containers that have not been cleaned or rinsed out. Empty containers or
liners may retain some product residues. Avoid dispersal of spilled material and
runoff and contact with soil, waterways, drains and sewers.
:
Disposal methods
Section 14. Transport information
Not available.
Not available.
Not available.
Not available.
UN number
UN proper
shipping name
Not available.
Not available.
TDG Classification
Not available.
Not available.
DOT Classification
IMDG
IATA
Date of issue/Date of revision
:
3/22/2024
Date of previous issue
:
3/22/2024
Version
:
2.02
8/10