SDS

Steel Reinforced Epoxy Resin - Twin Tube - Part A
Section 8. Exposure controls/personal protection
Hand protection
Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
Respiratory protection
:
:
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
:
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties and safety
characteristics
Physical state
Melting point/freezing point
Vapor pressure
Relative density
Relative vapor density
Solid.
Not available.
1.5 to 2
Not applicable.
Not available.
Characteristic.
Odor
pH
Black. Dark grey.
Color
Auto-ignition temperature
Flash point
Not applicable.
Closed cup: >93.3°C (>199.9°F)
Not applicable.
Not available.
Viscosity
Not applicable.
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point, initial boiling
point, and boiling range
:
>200°C (>392°F)
Flammability
:
Not available.
Lower and upper explosion
limit/flammability limit
:
Not applicable.
Decomposition temperature
:
Not available.
Solubility in water
:
Not available.
Miscible with water
:
No.
Particle characteristics
Median particle size
:
Not available.
The conditions of measurement of all properties are at standard temperature and pressure unless otherwise indicated.
Date of issue/Date of revision
:
3/15/2024
Date of previous issue
:
3/15/2024
Version
:
0.02
5/11