SDS

Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B
Section 16. Other information
3/22/2024
History
Date of printing
Date of issue/Date of
revision
Version
To the best of our knowledge, the information contained herein is accurate. However, neither the above-
named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or
completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may
present unknown hazards and should be used with caution. Although certain hazards are described herein,
we cannot guarantee that these are the only hazards that exist.
Notice to reader
Date of previous issue
:
:
:
:
Indicates information that has changed from previously issued version.
References
:
Not available.
Key to abbreviations
:
ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
HPR = Hazardous Products Regulations
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
N/A = Not available
SGG = Segregation Group
UN = United Nations
3/22/2024
3/22/2024
2.02
Procedure used to derive the classification
Classification
Justification
SKIN SENSITIZATION - Category 1
Calculation method
Date of issue/Date of revision
:
3/22/2024
Date of previous issue
:
3/22/2024
Version
:
2.02
10/10