SDS

Source
Ingredient
Material name
TWA
STEL
Peak
Notes
SECTION 5 Fire-fighting measures
Extinguishing media
There is no restriction on the type of extinguisher which may be used.
Use extinguishing media suitable for surrounding area.
Special hazards arising from the substrate or mixture
Fire Incompatibility
None known.
Special protective equipment and precautions for fire-fighters
Fire Fighting
Alert Fire Department and tell them location and nature of hazard.
Wear breathing apparatus plus protective gloves in the event of a fire.
Fire/Explosion Hazard
Non combustible.
Not considered a significant fire risk, however containers may burn.
Decomposition may produce toxic fumes of:
metal oxides
May emit poisonous fumes.
May emit corrosive fumes.
SECTION 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
See section 8
Environmental precautions
See section 12
Methods and material for containment and cleaning up
Minor Spills
Clean up all spills immediately.
Avoid breathing vapours and contact with skin and eyes.
Major Spills
Moderate hazard.
Clear area of personnel and move upwind.
Personal Protective Equipment advice is contained in Section 8 of the SDS.
SECTION 7 Handling and storage
Precautions for safe handling
Safe handling
Avoid all personal contact, including inhalation.
Wear protective clothing when risk of exposure occurs.
DO NOT
allow clothing wet with material to stay in contact with skin
Other information
Conditions for safe storage, including any incompatibilities
Suitable container
Polyethylene or polypropylene container.
Packing as recommended by manufacturer.
Storage incompatibility
None known
SECTION 8 Exposure controls / personal protection
Control parameters
Occupational Exposure Limits (OEL)
INGREDIENT DATA
US OSHA Permissible Exposure
Limits (PELs) Table Z-1
bisphenol A diglycidyl
ether polymer
Particulates Not Otherwise Regulated
(PNOR)- Total dust
15 mg/m3
Not
Available
Not
Available
Not Available
US OSHA Permissible Exposure
Limits (PELs) Table Z-1
bisphenol A diglycidyl
ether polymer
Particulates Not Otherwise Regulated
(PNOR)- Respirable fraction
5 mg/m3
Not
Available
Not
Available
Not Available
US OSHA Permissible Exposure
Limits (PELs) Table Z-3
bisphenol A diglycidyl
ether polymer
Inert or Nuisance Dust: Respirable fraction
5 mg/m3 / 15
mppcf
Not
Available
Not
Available
Not Available
US OSHA Permissible Exposure
Limits (PELs) Table Z-3
bisphenol A diglycidyl
ether polymer
Inert or Nuisance Dust: Total Dust
15 mg/m3 / 50
mppcf
Not
Available
Not
Available
Not Available
US NIOSH Recommended
Exposure Limits (RELs)
bisphenol A diglycidyl
ether polymer
Particulates not otherwise regulated
Not Available
Not
Available
Not
Available
See
Appendix D
Version No:
6.7
Page
3
of
9
J-B Weld Syringe Part A
Issue Date:
10/24/2022
Print Date:
10/24/2022
Continued...