SDS

ClearTop Pour-on Epoxy Part B
Section 9. Physical and chemical properties and safety
characteristics
Physical state
Melting point/freezing point
Vapor pressure
Relative density
Relative vapor density
Liquid. [Viscous liquid.]
Not available.
1.01 to 1.06
Not available.
Alcohol-like.
Odor
pH
Clear.
Color
Auto-ignition temperature
Flash point
Not available.
Closed cup: > 93.3°C (199.9°F)
Not applicable.
Not available.
Viscosity
Not available.
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point, initial boiling
point, and boiling range
:
Not available.
Flammability
:
Not available.
Lower and upper explosion
limit/flammability limit
:
Not available.
Decomposition temperature
:
Not available.
Solubility in water
:
Not available.
Miscible with water
:
No.
Particle characteristics
Median particle size
:
Not applicable.
The conditions of measurement of all properties are at standard temperature and pressure unless otherwise indicated.
Ingredient name
Vapor Pressure at 20˚C
Vapor pressure at 50˚C
mm Hg
kPa
Method
mm Hg
kPa
Method
water
17.5
2.3
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
Reactive or incompatible with the following materials:
oxidizing materials
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Date of issue/Date of revision
:
3/19/2024
Date of previous issue
:
3/15/2024
Version
:
0.02
5/11