SDS

.
8. Exposure Controls / Personal Protection
space
Exposure limits
Ingredient(s)
Exposure Limits
Formaldehyde, polymer with
N,N'-bis(2-aminoethyl)-1,2-ethanediamine and phenol
ACGIH-TLV
Not established
OSHA-PEL
Not established
Oxirane,
2,2-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]
homopolymer
ACGIH-TLV
Not established
OSHA-PEL
Not established
Phenol
ACGIH-TLV
TWA: 5 ppm
Skin: 5 ppm
OSHA-PEL
TWA: 5 ppm
Silica, amorphous, fumed
ACGIH-TLV
Not established
OSHA-PEL
Not established
Triethylene tetramine
ACGIH-TLV
Not established
OSHA-PEL
Not established
General ventilation normally adequate.
space
Engineering controls
space
Personal protective equipment
Eye / face protection
space
Hand protection
space
Skin and body protection
space
Respiratory protection
space
General hygiene considerations
Safety glasses if eye contact is possible.
Rubber gloves. Confirm with a reputable supplier first.
As required by employer code.
Where exposure guideline levels may be exceeded, use an approved NIOSH respirator.
Handle in accordance with good industrial hygiene and safety practice. When using do
not eat or drink. Wash hands before breaks and immediately after handling the product.
.
9. Physical and Chemical Properties
space
Appearance
space
Color
space
Form
space
Odor
space
Odor threshold
space
Physical state
space
pH
space
Melting point
space
Freezing point
space
Boiling point
space
Pour point
space
Pliable
Brown
Putty
Not available
Not available
Solid
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Evaporation rate
space
Flash point
space
Auto-ignition temperature
#22527
Page 3 of 8
Issue date
11-May-2012