Phau Ntawv Qhia

Parts of the Appliance

1. Weighing platform

2. LCD screen

3. Power / TARE button

4. Unit/Mode switch button

5. Battery cover

6. High precision sensors

Batteries Installation & Replacement

• Make sure you connect the batteries with the correct polarity.

• If the scale is not going to be used for a long time, remove the batteries batteries installation:

1. Unclip the battery cover (5) on the underside of the scale by pushing the clip inwards and

then lifting off. Place the batteries inside the battery compartment, connecting them to the

appropriate polarity.

2. Clip the battery cover back into place.

Note: During use, if the battery symbol “LO” appears on the screen, it means that battery

power is low and the batteries should be replaced.

Batteries replacement:

1. Unclip the battery cover (5) on the underside of the scale by pushing the clip inwards and

then lifting off. Remove the old batteries and fit the replacement (3xAAA),

2. Clip the battery cover back into place

Disposal of the old batteries:

Please refer to section for the correct disposal of the product.