User Manual

MODULATION

Iris 2 | ADJUSTING MODULATION RANGE Page 50

2. Right-click on the knob or slider, select the Assign sub-menu and then

choose an LFO, Envelope, Macro Knob, or Controller source from the

sub-menus. The modulation source will be applied to the ﬁrst available

Modulation Input slot.

ADJUSTING MODULATION RANGE

After applying a modulation source to a Modulation Input slot, two things will happen:

1. The slot turns into a Modulation Range knob to control the direction

and amount of modulation applied to the knob.

2. A ring or line will be drawn representing the modulation range.

Each modulation source is represented by dierent colors, making it easier to quickly

assess how a patch is being modulated.

To adjust the range or direction of the modulation, click and drag up or down on the

Modulation Range knob. These knobs also support iZotope’s standard keyboard and

mouse support (see Adjusting Parameters in Iris 2). Clicking once on the knob will allow

you to use the up/down arrow keys to alter the modulation range. Hovering over a

Modulation Range knob with the mouse and using the mouse wheel or trackpad to scroll

will also adjust the modulation range.